Download SimplyCam, SimplyLaser, SimplyLathe Trial version

SimplyCam Release History
To get the exact version number (or compiled release version) of the SimplyCam application on your computer, click About from the Help menu.

• 3.6.6.3: released on February 01, 2020
  Fixed many small bugs
• 3.6.6.0: released on January 24, 2020
  Fixed many small bugs
• 3.6.5.0: released on November 05, 2019
  Fixed many small bugs
• 3.6.0.0: released on July 30, 2019
  Added Merge Snc file
  Added Retract Plane in mill toolpaths
  Fixed pocket toolpath
  Fixed postprocessor vars
  Fixed many small bugs
• 3.5.0.0: released on November 15, 2018
  Fixed many small bugs
• 3.4.9.0: released on May 15, 2018
  Fixed many small bugs
• 3.4.0.0: released on November 15, 2017
  Fixed Svg parsing
  Fixed some small bugs
• 3.3.9.0: released on September 06, 2017
  Added toolpath to Geo/Dxf funcion
  Added Comments operations
  Fixed Write operation in Laser module
  Fixed some small bugs
• 3.3.8.0: released on July 19, 2017
  Added Laser Pocket toolpath
  Fixed some small bugs
• 3.3.6.0: released on February 14, 2017
  Fixed some small bugs
• 3.3.5.0: released on January 22, 2017
  Fixed dxf read lwpolyline
  Fixed some small bugs
• 3.3.0.0: released on July 16, 2016
  Added Write toolpath
  Fixed some small bugs
• 3.2.0.0: released on April 19, 2016
  Added GRBL Panel
  Added Solid Simulator
  Separate module management Mill, Laser, Lathe
  Added TrueType UTF8 management
  Added line-width of toolpath
  Fixed zig zag Pocket toolpath
  Fixed Drag/Drop operations
  Fixed crash on Simulation
  Fixed some small bugs
• 3.0.6.0: released on August 08, 2015
  Fixed open Contour toolpath
  Fixed crash on Simulation
  Fixed some small bugs
• 3.0.5.0: released on July 26, 2015
  Added Help
  Fixed Lathe Finish toolpath
  Fixed some small bugs
• 3.0.3.0: released on June 19, 2015
  Added Lathe Rough and Lathe Finish toolpath
  Fixed Vectorize function
  Fixed editing entities in Treeview
  Fixed some small bugs
• 3.0.1.0: released on April 07, 2015
• 2.4.0.0: released on January 20, 2015
  Fixed pocket zigzag toolpath with islands formed by small circles
  Fixed some small bugs
• 2.3.7.0: released on September 22, 2014
  Fixed "List index out of bounds" in Drill Cycle with wrong points definition
  Fixed some G2/G3 repeated and unnecessary
  Fixed some small bugs
• 2.3.4.0: released on May 30, 2014
  Fixed the lack of G1 after G2/G3, in very small movements
  Fixed some small bugs
• 2.3.1.0: released on December 26, 2013
  Fixed wrong toolpath with arcs mirrored or scaled
  Fixed writing toolpath comment of Operation Manager
  Fixed some small bugs
• 2.3.0.0: released on January 21, 2013
  Fixed breaking up in segments of the toolpath with arcs
  Added arcs filtering in vectorize process
  Fixed writing not required GCode in postprocessing
  Fixed some small bugs
• 2.2.0.0: released on December 11, 2012
  Fixed casual writing of arcs in the contour toolpath
  Fixed reading dxf spline (Settings, Max curve segments)
  Added Holding Tabs in contour toolpath
  Fixed some small bugs
• 2.1.0.0: released on August 30, 2012
  Added Undo function...Hurray!
  Fixed the cycles written in some posprocessors
  Added the Arc/Circle with 3 points
  Fixed Fillet, Trim, Break, Split, Joint and Extend function
  Fixed some small NC bugs
• 2.0.5.34: released on June 03, 2012
  Fixed simulation in the Nc Editor
  Added the ability to interrupt the toolpath calculation
  Fixed some small bugs
• 2.0.5.21: released on May 22, 2012
  Added 2d/3d simulation in the Nc Editor
  Fixed contour cw/ccw direction
• 2.0.1.0: released on May 01, 2012
• 1.8.0.0: released on October 11, 2011
  Fixed closed contour with very small entities
  Fixed "Access violation at..." in vector font insert
  Fixed some command after drill cycle
  Fixed move origin in Dxf open
• 1.75.00: released on June 21, 2011
  Added 7 new fonts Single Line
  Fixed the "The application failed ...." on points selection for drill cycle
• 1.73.00: released on December 29, 2010
  Updated OpenGL compatibility
  Fixed memory deallocations
• 1.72.00: released on December 14, 2010
  Fixed to read Dxf files created with Autocad 2010/2011
  Fixed memory deallocations with Pocket function
• 1.71.00: released on September 26, 2010
  Fixed the " The application failed ...." on some computers
  Fixed reading closing lwpolyline entities
• 1.70.00: released on September 18, 2010
  Added Single Line fonts management
  Fixed pocket with polyline/spline entities
• 1.59.30: released on July 13, 2010
  Added Polish language
  Added function to create holes along entity
  Fixed reading closed arcs
  Fixed some small bugs
• 1.59.20: released on March 31, 2010
  Windows 7 Compatibility Fix
  Fixed crash in font creation
  Fixed wrong toolpath display with R word
  Added Spanish language
• 1.59.10: released on October 2, 2009
  Fixed chain bug in Drill function
• 1.59.00: released on September 1, 2009
  Fixed memory deallocations
  Fixed contour/pocket with small entities
  Fixed circle pocket
  Fixed arrow in toolpath direction
  Added Level priority in chain All
  Added Remove all chain command
• 1.57.30: released on March 18, 2009
  Fixed chaining function
• 1.57.00: released on September 12, 2008
  Fixed reading lwpolyline entities with bulge
  Fixed some wrong cutting in pocket with island
• 1.56.00: released on May 08, 2008
  Fixed 'list out bond' message
  Added new vars in .pst file
• 1.55.00: released on March 08, 2008
  Added estimate machining time
  Added German language
  Fixed reading polyline with bulge
• 1.53.00: released on February 13, 2008
  Fixed reading Dxf file without header section
• 1.51.00: released on September 26, 2007
  Fixed some bugs
• 1.50.00: released on September 10, 2007
  Added Contour toolpath with cutter compensation
  Added Pocket toolpath
  Modified the profile selection
  Added Join and Split function
  Added "2d solid" simulation
• 1.27.03: released on June 4, 2007
  Added and fixed some postprocessor
  Fixed Dxf Block read
• 1.27.00: released on September 27, 2006
  Added Point grid and Point bolt circle
  Added Move/Copy operations in Translate, Rotate, Mirror and Scale functions
  Modified the use of Xform functions
  Added Distance functions
  Fixed Dxf v2004 read
• 1.26.02: released on August 28, 2006
  Added Line tangent 2 arcs, line tangent angle
  Added Line polar, Line perpendicular, Arc Tangent
  Added arc extension
  Fixed rare problem to write temp files.
• 1.25.11: released on August 05, 2006
  Improved stability
  Added 3d simulation
  Fixed drill simulation
• 1.25.03: released on July 22, 2006
  Added support to external language file
  Fixed peckdrill routine
• 1.25.02: released on July 16, 2006
  Fixed explode block function
  Fixed inch conversion
• 1.25.00 was released on Juny 30, 2006