SimplyCam V3. Documentation

• SimplyCam V3
  • Introduction
• Interface
  • Zoom and Pan
  • Status Bar
  • Snap
  • Layer
• Toolbars
  • File toolbar
  • Create toolbar
  • Edit toolbar
  • View toolbar
  • Status Bar
• Vectorization
  • Vectorize
• Settings
  • Settings
• Toolpath Manager
  • Simulation
  • PostProcessor
• Mill Toolpaths
  • Contour
    • Tools
    • Profiles
    • Parameters
      • Lead In/Out
      • Tabs
  • Pocket
    • Tools
    • Profiles
    • Parameters
      • Lead In/Out
  • Drill
    • Tools
    • Points Select
    • Parameters
  • Parallel
    • Tools
    • Size/Limits
    • Parameters
• Laser, Plasma, Waterjet Toolpaths
  • Cut
    • Tools
    • Profiles
    • Parameters
      • Lead In/Out
      • Tab
  • Laser Engraving
    • Tools
    • Parameters
• Lathe Toolpaths
  • Lathe Rough
    • Tools
    • Profiles
    • Parameters
  • Lathe Finish
    • Tools
    • Profiles
    • Parameters
• Mill tutorials
• Laser, Plasma, WaterJet tutorials
• Lathe tutorials

Parallel Parameters

This dialog contains the parameters specific for the Parallel toolpath.

Step Over
Sets the distance between each pass in XY plane.

Angle
Sets the machining angle for the Parallel toolpath from 0 to 360 degrees in the XY plane.

Resolution
This option determines the accuracy of the toolpath. Smaller value provide more accuracy but can result in slower performance.

Stock to leave
Sets the value of material to leave on the Stl model.

Roughing
If activated, performs the roughing of the model from the upper limit(Top Part) to the lower limit(Bottom Part).

Depth Increment
Set the value of material removed for each roughing Z cut.

Calculate button
Performs the calculation process of the Pocket toolpath, using the chained profiles and the current parameters defined.

Copyright ©2015 MR-Soft  -   SimplyCam version 3.0.6  -   Help file built on 12/08/2015